Home page

Dipper Star 12V10A (24V5A)

1. Safety Operating Procedures Connection sequence: When charging, connect the battery end plug first, then connect the AC power supply; after charging is complete, unplug the power plug first, and then disconnect the battery connection.‌ Environmental requirements: The charger should be used within the temperature range of 0℃ to 40℃. Avoid operating it in environments with temperatures lower than -10℃ or higher than 45℃.‌ Long-term storage: If the battery is not used for a long time, it is necessary to fully charge it approximately every 30 days to prevent the battery from being damaged due to low power.‌ 2.Charging parameters and efficiency AC：220V 50Hz Single-tube flyback charger: Charging efficiency ≈ 85% 3.Key Points for Charger Selection Matching parameters: The voltage and current of the charger must be consistent with the battery parameters. For example, a 48V battery requires a 48V charger.‌ Prohibition of mixed use: The chargers for lead-acid batteries and lithium batteries cannot be interchanged, as there are significant differences in charging and discharging characteristics.‌ Emergency Use: If the voltages are the same, the large-capacity charger can temporarily charge the small-capacity batteries. However, if used for a long time, it may cause overcharging or battery depletion. 4.Other important points to note Indicator lights: Red: Charging process is in progress; Green: Battery is fully charged. Word identification: N represents the positive pole, L represents the negative pole; for direct current, the "+" and "-" signs indicate the positive and negative poles respectively.‌ Winter charging: The charger charges at a constant current until it reaches the high voltage zone. Then, it performs float charging for 2 to 3 hours before cutting off the power. Ventilation and cooling: The charger should be placed in a well-ventilated area. Avoid covering it or placing it close to flammable materials. If the casing gets hot (about 50℃), stop using it immediately. Regular inspection: Before charging, check if the plug and cables are aged or damaged to avoid poor contact or short circuit risks.‌

Parameter details
Product details
Technical services
Application scenarios

Dipper Star 12V10A (24V5A) Charger Specification Sheet

Sequence	Model	Input		Output		Dimensions
Sequence	Model	Input voltage	Input power	Output voltage	Output current	Dimensions
1	12V10A	220V	170W	14.8V	10A	15x9x6cm
2	24V5A	220V	170W	29.6V	5A	15x9x6cm
Supporting customization for more models...

Keyword:

Messages

We will contact you within one working day. Please pay attention to your email.

Submit Now